modelMixingVolumeHeatReverseFlowPrescribedHeatFlowRate

Validation model for mixing volume with heat input and flow reversal and prescribed heat flow rate

Extends from MixingVolumeHeatReverseFlow (Validation model for mixing volume with heat input and flow reversal).

Information

This model is identical to IDEAS.Fluid.MixingVolumes.Validation.MixingVolumeHeatReverseFlow, except that the steady state volume volSte is configured to have a prescribed heat flow rate, which is in this case zero as the heat port is not connected. This configures volSte to use the two port steady state heat and mass balance model IDEAS.Fluid.Interfaces.StaticTwoPortConservationEquation.

Type	Name	Default	Description
Boolean	prescribedHeatFlowRate (from MixingVolumeReverseFlow)	false	Flag that affects what steady state balance is used in the volume
Modelica.Units.SI.Pressure	dp_nominal (from MixingVolumeReverseFlow)	10	Nominal pressure drop
Modelica.Units.SI.MassFlowRate	m_flow_nominal (from MixingVolumeReverseFlow)	2.0	Nominal mass flow rate

Type	Name	Description
Modelica.Fluid.Sources.MassFlowSource_T	sou (from MixingVolumeReverseFlow)	Flow source and sink
Sources.Boundary_pT	bou (from MixingVolumeReverseFlow)	Boundary condition
IDEAS.Fluid.MixingVolumes.MixingVolume	volDyn (from MixingVolumeReverseFlow)
IDEAS.Fluid.MixingVolumes.MixingVolume	volSte (from MixingVolumeReverseFlow)
Modelica.Blocks.Math.Gain	gain (from MixingVolumeReverseFlow)	Gain to add heat, moisture or trace substance flow rate
Modelica.Fluid.Sources.MassFlowSource_T	sou1 (from MixingVolumeReverseFlow)	Flow source and sink
Modelica.Blocks.Sources.Ramp	m_flow (from MixingVolumeReverseFlow)	Mass flow rate
Modelica.Thermal.HeatTransfer.Sources.PrescribedHeatFlow	preHeaDyn (from MixingVolumeHeatReverseFlow)	Prescribed heat flow rate
Modelica.Thermal.HeatTransfer.Sources.PrescribedHeatFlow	preHeaSte (from MixingVolumeHeatReverseFlow)	Prescribed heat flow rate