This record contains thermal and electrical parameters for a covered and insulated PVT collector, based on experimental identification results from Jonas et al. (2018). These parameters were used in the validation of a TRNSYS PVT collector model under ISO 9806:2013 quasi-dynamic conditions.
This record can be used as a generic representation of a covered, insulated PVT collector. However, if you know the brand and model of the PVT collector you plan to simulate or install, it is recommended to use the actual datasheet parameters in a custom IDEAS.Fluid.PVTCollectors.Data.GenericQuasiDynamic record.
record CI_Jonas2018 = IDEAS.Fluid.PVTCollectors.Data.GenericQuasiDynamic(final A = 1.79, final CTyp = IDEAS.Fluid.SolarCollectors.Types.HeatCapacity.TotalCapacity, final C = 16631*1.79, final V = 5/1000, final mDry = 26, final mperA_flow_nominal = 0.03, final dp_nominal = 60000, final incAngDat = Modelica.Units.Conversions.from_deg({0, 10, 20, 30, 40, 50, 60, 70, 90}), final incAngModDat = {1, 1, 0.99, 0.98, 0.97, 0.95, 0.92, 0.88, 0.00}, final colTyp = IDEAS.Fluid.PVTCollectors.Types.CollectorType.Covered, final IAMDiff = 0.94, final eta0 = 0.573, final c1 = 5.008, final c2 = 0.059, final c3 = 0.011, final c4 = 0.039, final c6 = 0.003, final P_nominal = 280, final gamma = -0.00370, final etaEl = 0.1390);