modelTwoPin

Shell model for models with two electrical connectors
Diagram of TwoPinOpen the diagram

Information

The model provides a shell for components with two connection pins using the following definitions:

In comparison to a one port, I1 and I2 do not have to be the same.

Connectors

TypeNameDefaultDescription
ModPowerSystems.Base.Interfaces.ComplexPhasor.SinglePhase.PinPin1
ModPowerSystems.Base.Interfaces.ComplexPhasor.SinglePhase.PinPin2

Components

TypeNameDefaultDescription
SI.ComplexVoltagevVoltage between Pin1 and Pin2
SI.ComplexCurrentiDifference between input and output current
SI.ComplexVoltagev1Voltage at Pin1
SI.ComplexVoltagev2Voltage at Pin2
SI.ComplexCurrenti1Current flowing into the component at Pin1
SI.ComplexCurrenti2Current flowing out of the component at Pin2
SI.VoltageVVoltage RMS phase-to-neutral
SI.VoltageVppVoltage RMS phase-to-phase
SI.VoltageV1Voltage RMS phase-to-neutral at Pin1
SI.VoltageV2Voltage RMS phase-to-neutral at Pin2
SI.CurrentICurrent RMS
SI.CurrentI1Current RMS into the component at Pin1
SI.CurrentI2Current RMS out of the component at Pin2
SI.AngleVangleVoltage phase
SI.AngleIangleCurrent phase
SI.VoltageVpeakVoltage peak phase-to-neutral
SI.CurrentIpeakCurrent peak