modelOnePortGroundedInit
Shell model for one-port models with one initialized electrical three-phase connector
Extends from ModPowerSystems.Base.Interfaces.ComplexPhasor.ThreePhase.OnePortGrounded (Shell model for one-port models with one electrical three-phase connector).
Information
The model represents a one port where the second pin is connected to the ground:
Note that, due to the fact that the second pin does not provide any additional information (voltage is zero and current the same as flowing into the port), it is not included in the model.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| SI.Voltage | Vnom | 110e3 | Nominal phase-to-phase RMS voltage |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| ModPowerSystems.Base.Interfaces.ComplexPhasor.ThreePhase.Plug | Plug1 (from OnePortGrounded) |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| SI.ComplexVoltage[3] | v (from OnePortGrounded) | Voltage between Plug1 | |
| SI.ComplexCurrent[3] | i (from OnePortGrounded) | Current flowing from Plug1 | |
| SI.ActivePower[3] | P (from OnePortGrounded) | Consumed Active Power | |
| SI.ReactivePower[3] | Q (from OnePortGrounded) | Reactive Power | |
| SI.Voltage[3] | V (from OnePortGrounded) | Voltage RMS phase-to-neutral | |
| SI.Voltage[3] | Vpp (from OnePortGrounded) | Voltage RMS phase-to-phase | |
| SI.Current[3] | I (from OnePortGrounded) | Current RMS | |
| SI.Angle[3] | Vangle (from OnePortGrounded) | Voltage phase | |
| SI.Angle[3] | Iangle (from OnePortGrounded) | Current phase | |
| SI.Angle[3] | phi (from OnePortGrounded) | Phase shift between voltage and current | |
| SI.Voltage[3] | Vpeak (from OnePortGrounded) | Voltage peak phase-to-neutral | |
| SI.Current[3] | Ipeak (from OnePortGrounded) | Current peak |