modelPiLine
Extends from ModPowerSystems.Base.Interfaces.ComplexPhasor.ThreePhase.TwoPin (Shell model for models with two electrical three-phase connectors).
Parameters
| Type | Name | Default | Description |
|---|
| SI.Resistance | r | {{0.207, 0, 0}, {0, 0.207, 0}, {0, 0, 0.207}} | Series Resistance per km |
| SI.Reactance | x | {{0.121, 0, 0}, {0, 0.121, 0}, {0, 0, 0.121}} | Series Reactance per km |
| Real | length | 20 | Length of line in km |
| SI.Susceptance | b | {{40e-6, 0, 0}, {0, 40e-6, 0}, {0, 0, 40e-6}} | Shunt Susceptance per km |
| SI.Conductance | g | {{0, 0, 0}, {0, 0, 0}, {0, 0, 0}} | Shunt Conductance per km |
| SI.Current | Imax | 100 | maximal current |
Components
| Type | Name | Default | Description |
|---|
| SI.ComplexVoltage[3] | v (from TwoPin) | | Voltage between Plug1 and Plug2 |
| SI.ComplexCurrent[3] | i (from TwoPin) | | Difference between input and output current |
| SI.ComplexVoltage[3] | v1 (from TwoPin) | | Voltage at Plug1 |
| SI.ComplexVoltage[3] | v2 (from TwoPin) | | Voltage at Plug2 |
| SI.ComplexCurrent[3] | i1 (from TwoPin) | | Current flowing into the component at Plug1 |
| SI.ComplexCurrent[3] | i2 (from TwoPin) | | Current flowing out of the component at Plug2 |
| SI.Voltage[3] | V (from TwoPin) | | Voltage RMS phase-to-neutral |
| SI.Current[3] | I (from TwoPin) | | Current RMS |
| SI.Voltage[3] | Vpeak (from TwoPin) | | Voltage peak phase-to-neutral |
| SI.Current[3] | Ipeak (from TwoPin) | | Current peak |
| ModPowerSystems.Base.System | system | | |
| SI.Resistance | R | r*length | |
| SI.Reactance | X | x*length | |
| SI.Inductance | L | X/system.omega | |
| SI.Susceptance | B | b*length | |
| SI.Conductance | G | g*length | |
| SI.Capacitance | C | B/system.omega | |
| SI.ComplexCurrent | i_rx | | |
| SI.Current | Irel | 'abs'(i1[:])/Imax*100 | |
