modelCHP

Extends from ModPowerSystems.Base.Interfaces.ComplexPhasor.SinglePhase.OnePortGroundedInit.

Parameters

TypeNameDefaultDescription
SI.VoltageVnom (from OnePortGroundedInit)110e3Nominal phase-to-phase RMS voltage
Realctrl0kind of control (0->according to thermal demand, 1->according to input)
Realctrl_ut0utilization of CHP [0,1], to be replaced by input!
StringprofileFileName"NoName"file where matrix is stored
StringprofileName"NoName"table name on file

Connectors

TypeNameDefaultDescription
ModPowerSystems.Base.Interfaces.ComplexPhasor.SinglePhase.PinPin1 (from OnePortGrounded)

Components

TypeNameDefaultDescription
Modelica.SIunits.ComplexVoltagev (from OnePortGrounded)
Modelica.SIunits.ComplexCurrenti (from OnePortGrounded)
SI.ActivePowerP (from OnePortGrounded)Consumed Active Power
SI.ReactivePowerQ (from OnePortGrounded)Reactive Power
SI.VoltageV (from OnePortGrounded)Voltage RMS phase-to-neutral
SI.VoltageVpeak (from OnePortGrounded)Voltage peak phase-to-neutral
SI.VoltageVpp (from OnePortGrounded)Voltage RMS phase-to-phase
SI.CurrentI (from OnePortGrounded)Current RMS
SI.CurrentIpeak (from OnePortGrounded)Current peak
SI.AngleVangle (from OnePortGrounded)Voltage phase
SI.AngleIangle (from OnePortGrounded)Current phase
SI.Anglephi (from OnePortGrounded)Phase shift between voltage and current
ModPowerSystems.Base.Systemsystem
ModPowerSystems.PhasorSinglePhase.Generation.ModelConstants.CHPs.RecordViessmannSFHmodel_data
RealE_thstored thermal energy [Wh]
SI.ActivePowerP_elgenerated real power
SI.ReactivePowerQ_elgenerated reactive power
SI.PowerP_thgenerated thermal power
SI.PowerP_cpower of combustion engine
RealP_relactive power relative to nominal power
RealPFpower factor
Modelica.Blocks.Sources.CombiTimeTablechpProfile
SI.PowerP_th_demchpProfile.y[1]thermal power demand