modelPQLoadProfile
Constant power load changing according to absolute P and Q profile
Extends from ModPowerSystems.Base.Interfaces.ComplexPhasor.SinglePhase.OnePortGroundedInit.
Information
This load model should not be used in transient mode yet.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| SI.Voltage | Vnom (from OnePortGroundedInit) | 110e3 | Nominal phase-to-phase RMS voltage |
| String | profileFileName | "NoName" | File where matrix is stored |
| String | profileName | "NoName" | Table name on file |
| Data in/out | |||
| Boolean | enableOutputPload | false | |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| ModPowerSystems.Base.Interfaces.ComplexPhasor.SinglePhase.Pin | Pin1 (from OnePortGrounded) | ||
| Modelica.Blocks.Interfaces.RealOutput | P_loadOut | P |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.SIunits.ComplexVoltage | v (from OnePortGrounded) | ||
| Modelica.SIunits.ComplexCurrent | i (from OnePortGrounded) | ||
| SI.ActivePower | P (from OnePortGrounded) | Consumed Active Power | |
| SI.ReactivePower | Q (from OnePortGrounded) | Reactive Power | |
| SI.Voltage | V (from OnePortGrounded) | Voltage RMS phase-to-neutral | |
| SI.Voltage | Vpeak (from OnePortGrounded) | Voltage peak phase-to-neutral | |
| SI.Voltage | Vpp (from OnePortGrounded) | Voltage RMS phase-to-phase | |
| SI.Current | I (from OnePortGrounded) | Current RMS | |
| SI.Current | Ipeak (from OnePortGrounded) | Current peak | |
| SI.Angle | Vangle (from OnePortGrounded) | Voltage phase | |
| SI.Angle | Iangle (from OnePortGrounded) | Current phase | |
| SI.Angle | phi (from OnePortGrounded) | Phase shift between voltage and current | |
| SI.ActivePower | Pref | LoadProfile.y[1] | active power reference |
| SI.ReactivePower | Qref | LoadProfile.y[2] | reactive power reference |
| Modelica.Blocks.Sources.CombiTimeTable | LoadProfile |