.Modelica.Blocks.Tables.CombiTable1Ds

Information

Univariate constant, linear or cubic Hermite spline interpolation in one dimension of a table. Via parameter columns it can be defined how many columns of the table are interpolated. If, e.g., columns={2,4}, it is assumed that 2 output signals are present and that the first output interpolates via column 2 and the second output interpolates via column 4 of the table matrix.

The grid points and function values are stored in a matrix "table[i,j]", where the first column "table[:,1]" contains the grid points and the other columns contain the data to be interpolated. Example:

table = [0,  0;
         1,  1;
         2,  4;
         4, 16]
If, e.g., the input u = 1.0, the output y =  1.0,
    e.g., the input u = 1.5, the output y =  2.5,
    e.g., the input u = 2.0, the output y =  4.0,
    e.g., the input u =-1.0, the output y = -1.0 (i.e., extrapolation).

The table matrix can be defined in the following ways:

  1. Explicitly supplied as parameter matrix "table", and the other parameters have the following values:
    tableName is "NoName" or has only blanks,
    fileName  is "NoName" or has only blanks.
    
  2. Read from a file "fileName" where the matrix is stored as "tableName". Both text and MATLAB MAT-file format is possible. (The text format is described below). The MAT-file format comes in four different versions: v4, v6, v7 and v7.3. The library supports at least v4, v6 and v7 whereas v7.3 is optional. It is most convenient to generate the MAT-file from FreeMat or MATLAB® by command
    save tables.mat tab1 tab2 tab3
    
    or Scilab by command
    savematfile tables.mat tab1 tab2 tab3
    
    when the three tables tab1, tab2, tab3 should be used from the model.
    Note, a fileName can be defined as URI by using the helper function loadResource.
  3. Statically stored in function "usertab" in file "usertab.c". The matrix is identified by "tableName". Parameter fileName = "NoName" or has only blanks. Row-wise storage is always to be preferred as otherwise the table is reallocated and transposed. See the Tables package documentation for more details.

When the constant "NO_FILE_SYSTEM" is defined, all file I/O related parts of the source code are removed by the C-preprocessor, such that no access to files takes place.

If tables are read from a text file, the file needs to have the following structure ("-----" is not part of the file content):

-----------------------------------------------------
#1
double tab1(5,2)   # comment line
  0   0
  1   1
  2   4
  3   9
  4  16
double tab2(5,2)   # another comment line
  0   0
  2   2
  4   8
  6  18
  8  32
-----------------------------------------------------

Note, that the first two characters in the file need to be "#1" (a line comment defining the version number of the file format). Afterwards, the corresponding matrix has to be declared with type (= "double" or "float"), name and actual dimensions. Finally, in successive rows of the file, the elements of the matrix have to be given. The elements have to be provided as a sequence of numbers in row-wise order (therefore a matrix row can span several lines in the file and need not start at the beginning of a line). Numbers have to be given according to C syntax (such as 2.3, -2, +2.e4). Number separators are spaces, tab (\t), comma (,), or semicolon (;). Several matrices may be defined one after another. Line comments start with the hash symbol (#) and can appear everywhere. Text files should either be ASCII or UTF-8 encoded, where UTF-8 encoded strings are only allowed in line comments and an optional UTF-8 BOM at the start of the text file is ignored. Other characters, like trailing non comments, are not allowed in the file.

MATLAB is a registered trademark of The MathWorks, Inc.


Generated at 2024-03-27T19:15:56Z by OpenModelicaOpenModelica 1.22.3 using GenerateDoc.mos