.Modelica.Electrical.Analog.Basic.GeneralVoltageToCurrentAdaptor

Information

Adaptor between an electrical openport and a signal representation of the oneport. This component is used to provide a pure signal interface around an Electrical model and export this model in form of an input/output block, especially as FMU (Functional Mock-up Unit). Examples of the usage of this adaptor are provided in Electrical.Analog.Examples.GenerationOfFMUs. This adaptor has voltage and derivative of voltage as input signals and current and derivative of current as output signal.

Note, the input signals must be consistent to each other (dv=der(v)).

Note, the adaptor contains no ground. Bear in mind that separating physical components and connecting them via adaptor signals requires to place appropriate ground components to define electric potential within the subcircuits.


Generated at 2024-12-11T19:25:49Z by OpenModelicaOpenModelica 1.24.2 using GenerateDoc.mos