.Modelica.Electrical.Spice3.Additionals.F_CCC_POLY

Information

The polynomial source is a SPICE2 model, which is also known in other SPICE derivatives.

Nonlinear current controlled current source. The "right" port current at pin p2 (=p2.i) is controlled by the "left" port vector of currents at pin pc[:] via

p2.i = f(pc[2].i, pc[4].i,...)

The controlling port (left) voltage is zero for each pair: pc[2].v - pc[1].v = 0, ...

Furthermore the currents of each pair are pc[2].i + pc[1].i = 0, ...

f is a polynomial in N variables s1...sN of the following form with M+1 coefficients a0, a1, a2,...aM.

f = a0 +
    a1s1 + a2s2 + ... + aNsN +
    a(N+1)s1² + a(N+2)s1s2 + ... + a(.)s1sN +
    a(.)s2² + a(.)s2s3 + ... + a(.)s2sN +
    a(.)s3² + s3s4 + ... + a(.)s4sN +
    ... +
    a(.)sN² +
    a(.)s1³ + a(.)s1²s2 + a(.)s1²s3 + ... + a(.)s1²sN +
    a(.)s1s2² + a(.)s1s2s3 + ... + a(.)s1s2sN +
    ... +
    a(.)sN³ + ...

The Coefficients a(.) are counted in this order. Reaching M, the particular sum is canceled.

In Modelica the controlling pins have to be connected to the CCC in that way, that the required currents flow through the according pins of the CCC:

s1=pc[2].i, s2=pc[4].i, s3=pc[6].i,...

The pairs pc[1].i and pc[2].i, pc[3].i and pc[4].i...form ports with pc[2].i + pc[1].i = 0, pc[4].i + pc[3].i = 0, ...

The corresponding SPICE description of the CCC polynomial source is the following:

Fname A1 A2 POLY(N) V1...VN P0 P1...

where Fname is the name of the instance, A1 and A2 are the nodes between them the current source is arranged, whose current is calculated.

N is the number of the controlling currents, V1...VN are the voltage sources, that are necessary in SPICE to supply the controlling currents,

and P0, P1... are the coefficients that are called a0, a1, ... aM in the description of the polynomial f above.

To describe the SPICE line in Modelica, the following explanation would be useful:

Fname -> F_CCC_POLY name
A1, A2 -> pins name.p2, name.p1
N -> parameter N

V1 (...VN) is declared in SPICE:

V1 V1+ V1- type of voltage source (constant, pulse, sin...)

In Modelica the currents through V1...VN has to be led through the CCC. Therefore V1...VN have to be disconnected and additional nodes

V1_AD...VN_AD

have to be added. In the case, that the SPICE source is

V1 n+ n- 0,

this source can be eliminated.

V1_AD -> name.pc[2]
V1- -> name.pc[1]
...
VN_AD -> name.pc[N]
VN- -> name.pc[N-1]
P0, P1 -> polynomial coefficients name.coeff(coeff={P0,P1,...})

Revisions

• Sept 2008 by Kristin Majetta
  initially implemented