.Modelica.Electrical.Spice3.Basic.F_CCC

Information

The linear current-controlled current source is a TwoPort. The "right" port current at pin 2 (=p2.i) is controlled by the "left" port current at pin p1(=p1.i) via

p2.i = p1.i * gain.

The controlling port voltage is zero. Any current gain can be chosen.

The corresponding SPICE description

Fname N+ N- VNAM VALUE

is translated to Modelica:

Fname -> Spice3.Basic.F_CCC Fname
(Fname is the name of the Modelica instance)
N+ -> p2.i
N- -> n2.i

The voltage source VNAM has the two nodes NV+ and NV-:

VNAM NV+ NV- VALUE_V

The current through VNAM hast to be led through the CCC.

Therefore VNAM has to be disconnected and an additional

node NV_AD has to be added.

NV_AD -> p1.i
NV- -> n1.i

On this way the current, that flows through the voltage source VNAM, flows through the CCC.

VALUE -> gain