.Modelica.Thermal.FluidHeatFlow.Sources.VolumeFlow

Enforces constant volume flow

Information

Fan resp. pump with constant volume flow rate. Pressure increase is the response of the whole system.

Coolant's temperature and enthalpy flow are not affected.

Setting parameter m (mass of medium within fan/pump) to zero leads to neglect of temperature transient cv*m*der(T).

Thermodynamic equations are defined by BaseClasses.TwoPort.


Generated at 2025-04-03T18:24:42Z by OpenModelicaOpenModelica 1.24.5 using GenerateDoc.mos