modelCosineVoltage
Cosine voltage source
Extends from Interfaces.VoltageSource (Interface for voltage sources).
Information
This voltage source uses the corresponding signal source of the Modelica.Blocks.Sources package. Care for the meaning of the parameters in the Blocks package. Furthermore, an offset parameter is introduced, which is added to the value calculated by the blocks source. The startTime parameter allows to shift the blocks source behavior on the time axis.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| SI.Voltage | V | Amplitude of cosine wave | |
| SI.Angle | phase | 0 | Phase of cosine wave |
| SI.Frequency | f | Frequency of cosine wave | |
| SI.Voltage | offset (from VoltageSource) | 0 | Voltage offset |
| SI.Time | startTime (from VoltageSource) | 0 | Time offset |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| PositivePin | p (from TwoPin) | Positive electrical pin | |
| NegativePin | n (from TwoPin) | Negative electrical pin |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| SI.Voltage | v (from TwoPin) | Voltage drop of the two pins (= p.v - n.v) | |
| SI.Current | i (from OnePort) | Current flowing from pin p to pin n | |
| Modelica.Blocks.Interfaces.SignalSource | signalSource (from VoltageSource) |
Revisions
- Initially implemented by Christian Kral on 2013-05-14