modelDLATR
Level sensitive register bank with reset
Information
Description in VHDL is given by http://www.cs.sfu.ca/~ggbaker/reference/std_logic/src/std_logic_entities.vhd
Truth Table for high active reset:
| DataIn | Enable | Reset | DataOut | Map |
| * | * | U | U | 1 |
| * | * | 1 | 0 | 2 |
| * | 0 | 0 | NC | 3 |
| * | 1 | 0 | DataIn | 3 |
| * | X | 0 | X or U or NC | 3 |
| * | U | ~1 | U | 4 |
| * | ~U | X | X or U or 0 or NC | 4 |
Truth Table for low active reset:
| DataIn | Enable | Reset | DataOut | Map |
| * | * | U | U | 1 |
| * | * | 0 | 0 | 2 |
| * | 0 | 1 | NC | 3 |
| * | 1 | 1 | DataIn | 3 |
| * | X | 1 | X or U or NC | 3 |
| * | U | ~0 | U | 4 |
| * | ~U | X | X or U or 0 or NC | 4 |
* = do not care ~ = not equal U = L.'U' 0 = L.'0' or L.'L' 1 = L.'1' or L.'H' X = L.'X' or L.'W' or L.'Z' or L.'-' NC = no change
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Integer[L] | ResetMap | {1, 4, 3, 2, 4, 4, 3, 2, 4} | Function selection, defaults for high active reset |
| D.Interfaces.Strength | strength | S.'S_X01' | Output strength |
| Integer | n | 1 | Data width |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| D.Interfaces.DigitalInput | reset | ||
| D.Interfaces.DigitalInput | enable | ||
| D.Interfaces.DigitalInput[n] | dataIn | ||
| D.Interfaces.DigitalOutput[n] | dataOut |
Revisions
- September 11, 2009 created by Ulrich Donath