modelTwoPortControlledSources
Component with two electrical ports, including current
Information
TwoPort is a partial model that consists of two ports. It is assumed that the current flowing into the positive pin is identical to the current flowing out of pin n. This currents of each port are provided explicitly as currents i1 and i2, the voltages respectively as v1 and v2.
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Electrical.Analog.Interfaces.PositivePin | p1 | Positive pin of the controlling port | |
| Modelica.Electrical.Analog.Interfaces.NegativePin | n1 | Negative pin of the controlling port | |
| Modelica.Electrical.Analog.Interfaces.PositivePin | p2 | Positive pin of the controlled port | |
| Modelica.Electrical.Analog.Interfaces.NegativePin | n2 | Negative pin of the controlled port |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| SI.Voltage | v1 | Voltage drop over the controlling port | |
| SI.Voltage | v2 | Voltage drop over the controlled port | |
| SI.Current | i1 | Current flowing from pos. to neg. pin of the controlling port | |
| SI.Current | i2 | Current flowing from pos. to neg. pin of the controlled port |