modelPartialPressureLoss
Base flow model for pressure loss functions with the same area at port_a and at port_b
Extends from Modelica.Fluid.Interfaces.PartialTwoPortTransport (Partial element transporting fluid between two ports without storage of mass or energy).
Parameters
| Type | Name | Default | Description |
|---|
| Assumptions |
| Boolean | allowFlowReversal (from PartialTwoPort) | system.allowFlowReversal | = true to allow flow reversal, false restricts to design direction (port_a -> port_b) |
| Advanced |
| Medium.AbsolutePressure | dp_start (from PartialTwoPortTransport) | 0.01*system.p_start | Guess value of dp = port_a.p - port_b.p |
| Medium.MassFlowRate | m_flow_start (from PartialTwoPortTransport) | system.m_flow_start | Guess value of m_flow = port_a.m_flow |
| Medium.MassFlowRate | m_flow_small (from PartialTwoPortTransport) | if system.use_eps_Re then system.eps_m_flow*system.m_flow_nominal else system.m_flow_small | Small mass flow rate for regularization of zero flow |
| Advanced › Diagnostics |
| Boolean | show_T (from PartialTwoPortTransport) | true | = true, if temperatures at port_a and port_b are computed |
| Boolean | show_V_flow (from PartialTwoPortTransport) | true | = true, if volume flow rate at inflowing port is computed |
Components
| Type | Name | Default | Description |
|---|
| Modelica.Fluid.System | system (from PartialTwoPort) | | System wide properties |
| Medium.MassFlowRate | m_flow (from PartialTwoPortTransport) | | Mass flow rate in design flow direction |
| SI.Pressure | dp (from PartialTwoPortTransport) | | Pressure difference between port_a and port_b (= port_a.p - port_b.p) |
| SI.VolumeFlowRate | V_flow (from PartialTwoPortTransport) | m_flow/Modelica.Fluid.Utilities.regStep(m_flow, Medium.density(state_a), Medium.density(state_b), m_flow_small) | Volume flow rate at inflowing port (positive when flow from port_a to port_b) |
| Medium.Temperature | port_a_T (from PartialTwoPortTransport) | Modelica.Fluid.Utilities.regStep(port_a.m_flow, Medium.temperature(state_a), Medium.temperature(Medium.setState_phX(port_a.p, port_a.h_outflow, port_a.Xi_outflow)), m_flow_small) | Temperature close to port_a, if show_T = true |
| Medium.Temperature | port_b_T (from PartialTwoPortTransport) | Modelica.Fluid.Utilities.regStep(port_b.m_flow, Medium.temperature(state_b), Medium.temperature(Medium.setState_phX(port_b.p, port_b.h_outflow, port_b.Xi_outflow)), m_flow_small) | Temperature close to port_b, if show_T = true |
