modelValveDiscreteRamp
Valve for water/steam flows with discrete opening signal and ramp opening
Extends from Modelica.Fluid.Interfaces.PartialTwoPortTransport (Partial element transporting fluid between two ports without storage of mass or energy).
Information
This model is similar to ValveDiscrete,
except that the valve opens gradually with an opening time Topen and closes gradually with
a closing time Tclose instead of doing so abruptly. This can help to avoid unrealistic phenomena such
as reversing flows when accurate fluid models with small compressiblity are employed.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Medium.MassFlowRate | m_flow_nominal | Nominal mass flowrate at full opening | |
| Real | opening_min | 0 | Remaining opening if closed, causing small leakage flow |
| Types.HydraulicConductance | k | m_flow_nominal/dp_nominal | Hydraulic conductance at full opening |
| SI.Time | Topen | Time to fully open the valve | |
| SI.Time | Tclose | Topen | Time to fully close the valve |
| Assumptions | |||
| Boolean | allowFlowReversal (from PartialTwoPort) | system.allowFlowReversal | = true to allow flow reversal, false restricts to design direction (port_a -> port_b) |
| Advanced | |||
| Medium.AbsolutePressure | dp_start (from PartialTwoPortTransport) | 0.01*system.p_start | Guess value of dp = port_a.p - port_b.p |
| Medium.MassFlowRate | m_flow_start (from PartialTwoPortTransport) | system.m_flow_start | Guess value of m_flow = port_a.m_flow |
| Medium.MassFlowRate | m_flow_small (from PartialTwoPortTransport) | if system.use_eps_Re then system.eps_m_flow*system.m_flow_nominal else system.m_flow_small | Small mass flow rate for regularization of zero flow |
| Advanced › Diagnostics | |||
| Boolean | show_T (from PartialTwoPortTransport) | true | = true, if temperatures at port_a and port_b are computed |
| Boolean | show_V_flow (from PartialTwoPortTransport) | true | = true, if volume flow rate at inflowing port is computed |
| Nominal operating point | |||
| SI.AbsolutePressure | dp_nominal | Nominal pressure drop at full opening | |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Fluid.Interfaces.FluidPort_a | port_a (from PartialTwoPort) | Fluid connector a (positive design flow direction is from port_a to port_b) | |
| Modelica.Fluid.Interfaces.FluidPort_b | port_b (from PartialTwoPort) | Fluid connector b (positive design flow direction is from port_a to port_b) | |
| Modelica.Blocks.Interfaces.BooleanInput | open |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Fluid.System | system (from PartialTwoPort) | System wide properties | |
| Medium.MassFlowRate | m_flow (from PartialTwoPortTransport) | Mass flow rate in design flow direction | |
| SI.Pressure | dp (from PartialTwoPortTransport) | Pressure difference between port_a and port_b (= port_a.p - port_b.p) | |
| SI.VolumeFlowRate | V_flow (from PartialTwoPortTransport) | m_flow/Modelica.Fluid.Utilities.regStep(m_flow, Medium.density(state_a), Medium.density(state_b), m_flow_small) | Volume flow rate at inflowing port (positive when flow from port_a to port_b) |
| Medium.Temperature | port_a_T (from PartialTwoPortTransport) | Modelica.Fluid.Utilities.regStep(port_a.m_flow, Medium.temperature(state_a), Medium.temperature(Medium.setState_phX(port_a.p, port_a.h_outflow, port_a.Xi_outflow)), m_flow_small) | Temperature close to port_a, if show_T = true |
| Medium.Temperature | port_b_T (from PartialTwoPortTransport) | Modelica.Fluid.Utilities.regStep(port_b.m_flow, Medium.temperature(state_b), Medium.temperature(Medium.setState_phX(port_b.p, port_b.h_outflow, port_b.Xi_outflow)), m_flow_small) | Temperature close to port_b, if show_T = true |
| Blocks.Logical.TriggeredTrapezoid | openingGenerator |
Revisions
- Mar 2020 by Francesco Casella (based on ValveLinear and ValveDiscrete).