modelElectroMagneticConverterWithLeakageInductance
Electromagnetic energy conversion with a leakage inductance
Information
Same as ElectroMagneticConverter with an additional leakage path on the magnetic side (leakage inductance, leakage flux). This model may improve stability especially when the magnetic circuit contains more than one electromagnetic converter.
Note
The flux linkage Ψ and the static inductance L_stat = |Ψ/i| are calculated for information only.
Note that L_stat is set to |Ψ/eps| if |i| < eps (= 100*Modelica.Constants.eps).
Note that this local calculation of L_stat is only valid if this coil is the only source in the magnetic circuit.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Real | N | Number of turns | |
| SI.Permeance | G_m | Modelica.Constants.mu_0*mu_rel*A/L | Magnetic permeance of leakage inductance |
| Leakage inductance | |||
| SI.Length | L | 10e-3 | Length in direction of flux |
| SI.Area | A | 10e-6 | Area of cross-section |
| SI.RelativePermeability | mu_rel | 1 | Constant relative permeability of leakage inductance (> 0 required) |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Magnetic.FluxTubes.Interfaces.PositiveMagneticPort | port_p | Positive magnetic port | |
| Magnetic.FluxTubes.Interfaces.NegativeMagneticPort | port_n | Negative magnetic port | |
| Modelica.Electrical.Analog.Interfaces.PositivePin | p | Positive electrical pin | |
| Modelica.Electrical.Analog.Interfaces.NegativePin | n | Negative electrical pin |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| SI.Voltage | v | Voltage | |
| SI.Current | i | Current | |
| SI.MagneticPotentialDifference | V_m | Magnetic potential difference | |
| SI.MagneticFlux | Phi | Total Magnetic flux coupled into magnetic circuit (= Phi_ind + Phi_leak) | |
| SI.MagneticFlux | Phi_ind | Magnetic flux of converter | |
| SI.MagneticFlux | Phi_leak | Magnetic flux of leakage inductance | |
| SI.MagneticFlux | Psi | Flux linkage | |
| SI.Inductance | L_stat | Static inductance (valid if this coil is the only source) |