modelDamper
Linear 1D rotational damper
Extends from Modelica.Mechanics.Rotational.Interfaces.PartialCompliantWithRelativeStates (Partial model for the compliant connection of two rotational 1-dim. shaft flanges where the relative angle and speed are used as preferred states), Modelica.Thermal.HeatTransfer.Interfaces.PartialElementaryConditionalHeatPortWithoutT (Partial model to include a conditional HeatPort in order to dissipate losses, used for textual modeling, i.e., for elementary models).
Information
Linear, velocity dependent damper element. It can be either connected between an inertia or gear and the housing (component Fixed), or between two inertia/gear elements.
See also the discussion State Selection in the User's Guide of the Rotational library.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| SI.RotationalDampingConstant | d | Damping constant | |
| Boolean | useHeatPort (from PartialElementaryConditionalHeatPortWithoutT) | false | = true, if heatPort is enabled |
| Advanced | |||
| SI.Angle | phi_nominal (from PartialCompliantWithRelativeStates) | 1e-4 | Nominal value of phi_rel (used for scaling) |
| StateSelect | stateSelect (from PartialCompliantWithRelativeStates) | StateSelect.prefer | Priority to use phi_rel and w_rel as states |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Flange_a | flange_a (from PartialCompliantWithRelativeStates) | Left flange of compliant 1-dim. rotational component | |
| Flange_b | flange_b (from PartialCompliantWithRelativeStates) | Right flange of compliant 1-dim. rotational component | |
| HeatTransfer.Interfaces.HeatPort_a | heatPort (from PartialElementaryConditionalHeatPortWithoutT) | Optional port to which dissipated losses are transported in form of heat |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| SI.Angle | phi_rel (from PartialCompliantWithRelativeStates) | Relative rotation angle (= flange_b.phi - flange_a.phi) | |
| SI.AngularVelocity | w_rel (from PartialCompliantWithRelativeStates) | Relative angular velocity (= der(phi_rel)) | |
| SI.AngularAcceleration | a_rel (from PartialCompliantWithRelativeStates) | Relative angular acceleration (= der(w_rel)) | |
| SI.Torque | tau (from PartialCompliantWithRelativeStates) | Torque between flanges (= flange_b.tau) | |
| SI.Power | lossPower (from PartialElementaryConditionalHeatPortWithoutT) | Loss power leaving component via heatPort (> 0, if heat is flowing out of component) |