modelPartialElementaryTwoFlangesAndSupport2
Partial model for a component with one translational 1-dim. shaft flange and a support used for textual modeling, i.e., for elementary models
Extends from Translational.Interfaces.PartialTwoFlanges (Component with two translational 1D flanges).
Information
This is a 1-dim. translational component with two flanges and an additional support. It is used e.g., to build up elementary ideal gear components. The component contains the force balance, i.e., the sum of the forces of the connectors is zero (therefore, components that are based on PartialGear cannot have a mass). The support connector needs to be connected to avoid the unphysical behavior that the support force is required to be zero (= the default value, if the connector is not connected).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Boolean | useSupport | false | = true, if support flange enabled, otherwise implicitly grounded |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Flange_a | flange_a (from PartialTwoFlanges) | (left) driving flange (flange axis directed into cut plane, e. g. from left to right) | |
| Flange_b | flange_b (from PartialTwoFlanges) | (right) driven flange (flange axis directed out of cut plane) | |
| Support | support | Support/housing of component |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| SI.Length | s_a | Distance between left flange and support | |
| SI.Length | s_b | Distance between right flange and support |