modelPartialRigid
Rigid connection of two translational 1D flanges
Extends from Translational.Interfaces.PartialTwoFlanges (Component with two translational 1D flanges).
Information
This is a 1-dim. translational component with two rigidly connected flanges. The fixed distance between the left and the right flange is defined by parameter "L". The forces at the right and left flange can be different. It is used e.g., to built up sliding masses.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| SI.Length | L | Length of component, from left flange to right flange (= flange_b.s - flange_a.s) |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Flange_a | flange_a (from PartialTwoFlanges) | (left) driving flange (flange axis directed into cut plane, e. g. from left to right) | |
| Flange_b | flange_b (from PartialTwoFlanges) | (right) driven flange (flange axis directed out of cut plane) |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| SI.Position | s | Absolute position of center of component (s = flange_a.s + L/2 = flange_b.s - L/2) |