modelPartialTwoFlangesAndSupport
Partial model for a component with two translational 1-dim. shaft flanges and a support used for graphical modeling, i.e., the model is build up by drag-and-drop from elementary components
Extends from Translational.Interfaces.PartialTwoFlanges (Component with two translational 1D flanges).
Information
This is a 1-dim. translational component with two flanges and a support/housing. It is used e.g., to build up parts of a drive train graphically consisting of several components.
If useSupport=true, the support connector is conditionally enabled
and needs to be connected.
If useSupport=false, the support connector is conditionally disabled
and instead the component is internally fixed to ground.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Boolean | useSupport | false | = true, if support flange enabled, otherwise implicitly grounded |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Flange_a | flange_a (from PartialTwoFlanges) | (left) driving flange (flange axis directed into cut plane, e. g. from left to right) | |
| Flange_b | flange_b (from PartialTwoFlanges) | (right) driven flange (flange axis directed out of cut plane) | |
| Support | support | Support/housing of component |