.ModelicaAdditions.MultiBody.Examples.Loops.Utilities.Engine

Information

Use the following settings:

experiment StopTime=0.2 Interval=0.002 Tolerance=1.E-8


Perform 'simulate' and then see animation in
Animation window.

  Plot the following variables:

  AngVelDegS: Angular velocity of motor shaft [rev/min]
  x         : position of cylinder [m]
  press     : pressure in cylinder [bar]

Generated at 2024-12-22T19:25:51Z by OpenModelicaOpenModelica 1.24.3 using GenerateDoc.mos