modelVolumeATh

Mixing volume with 2 inlets and 2 outlets and thermal input
Diagram of VolumeAThOpen the diagram
▶ Check in your browser

Information

Copyright © EDF 2002 - 2010

ThermoSysPro Version 2.0

This component model is documented in Sect. 14.1 of the ThermoSysPro book.

Parameters

TypeNameDefaultDescription
Booleanspecific_enthalpy_as_state_variabletruetrue: specific enthalpy is state variable for the state equation - false: temperature is state variable for the state equation
Integerfluid11: water/steam - 2: C3H3F5 - 3: Simple
Modelica.Units.SI.Densityp_rho0If > 0, fixed fluid density
Modelica.Units.SI.SpecificHeatCapacitycp4200Specific heat capacity
Realb190e-5
Integermode0IF97 region. 1:liquid - 2:steam - 4:saturation line - 0:automatic

Connectors

TypeNameDefaultDescription
ThermoSysPro.Thermal.Connectors.ThermalPortCth
ThermoSysPro.WaterSteam.Connectors.FluidInletCe1
ThermoSysPro.WaterSteam.Connectors.FluidInletCe2
ThermoSysPro.WaterSteam.Connectors.FluidOutletCs1
ThermoSysPro.WaterSteam.Connectors.FluidOutletCs2

Components

TypeNameDefaultDescription
Modelica.Units.SI.TemperatureTFluid temperature
Modelica.Units.SI.AbsolutePressurePFluid pressure
Modelica.Units.SI.SpecificEnthalpyhFluid specific enthalpy
Modelica.Units.SI.DensityrhoFluid density
Modelica.Units.SI.MassFlowRateBQRight hand side of the mass balance equation
Modelica.Units.SI.PowerBHRight hand side of the energybalance equation

Revisions

Author

  • Daniel Bouskela