.ObjectStab.Base.Pin

Information

The electrical connectors of ObjectStab models are modelled by the voltages and
currents in phasor representation:

I =   ia + j ib
V = 1+va + j vb

The constant one has been introduced in order to help the initial value solver.
Two connected Pins results in the following equations:

Pin1.va = Pin2.va
Pin1.vb = Pin2.vb
Pin1.ia + Pin2.ia = 0
Pin1.ib + Pin2.ib = 0

By definition, currents are considered positive when injected into a component.

Generated at 2019-11-20T02:39:14Z by OpenModelicaOpenModelica 1.16.0~dev-21-g8b27e5b using GenerateDoc.mos