modelMotor
Extends from OpenHydraulics.Interfaces.PartialFluidComponent (Base model for any component involving fluid).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Sizing | |||
| SI.Volume | Dconst | 1e-5 | Displacement of the motor |
| Losses | |||
| Real | damp | 100000 | Viscous damping constant |
| Config Options | |||
| Boolean | usePRV | true | True if pressure relieve valves are present |
| Initialization › Fluid | |||
| SI.AbsolutePressure | p_init (from PartialFluidComponent) | environment.p_ambient | Initial temperature of the component |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| OpenHydraulics.Interfaces.FluidPort | portB | ||
| OpenHydraulics.Interfaces.FluidPort | portA | ||
| Modelica.Mechanics.Rotational.Interfaces.Flange_b | flange_b | (right) driven flange (flange axis directed OUT OF cut plane) |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| OpenHydraulics.Basic.FluidPower2MechRotConst | idealMotor | ||
| OpenHydraulics.Basic.LaminarRestriction | leakeage_A2B | Laminar leakage between ports A to B | |
| OpenHydraulics.Components.Valves.ReliefValve | PRV_A2B | Relief from port A to B | |
| OpenHydraulics.Components.Valves.ReliefValve | PRV_B2A | Relief from port B to A | |
| Modelica.Mechanics.Rotational.Components.Damper | damper | ||
| Modelica.Mechanics.Rotational.Components.Fixed | fixed | ||
| OpenHydraulics.Components.Lines.NJunction | j2 | ||
| OpenHydraulics.Components.Lines.NJunction | j1 | ||
| OpenHydraulics.Fluids.BaseClasses.PartialFluid | oil (from PartialFluidComponent) | This model must be defined in each circuit; the type must be a subtype of PartialFluid |