modelSVC
On bus 10106 & 10114
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Types.PerUnit | Vref | Reference voltage | |
| Types.PerUnit | Bref | Reference susceptance | |
| Real | K | 150 | Steady-state gain |
| Types.Time | T1 | Time constant | |
| Types.Time | T2 | Time constant | |
| Types.Time | T3 | Time constant | |
| Types.Time | T4 | Time constant | |
| Types.Time | T5 | 0.03 | Time constant of thyristor bridge |
| Types.PerUnit | Vmax | ||
| Types.PerUnit | Vmin | ||
| Types.PerUnit | Vov | 0.5 | Override voltage |
| Types.ApparentPower | Sbase | Base power of the bus | |
| Real | init_SVC_Leadlag | Initial value | |
| Real | init_SVC_Lag | Initial value | |
| Real | OtherSignals | ||
| Types.ReactivePower | var_C | 100e6 | Total compensation capacity of shunt capacitor, 100(10106)/200(10114) |
| Types.ReactivePower | var_R | -50e6 | Total compensation capacity of shunt reactor |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| OpenIPSL.Interfaces.PwPin | VIB | Voltage signal connected to stepdown transformer |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Sources.Constant | imSetPoint | ||
| Modelica.Blocks.Sources.Constant | imSetPoint1 | ||
| OpenIPSL.NonElectrical.Continuous.LeadLag | imLeadLag | ||
| OpenIPSL.NonElectrical.Continuous.LeadLag | imLeadLag1 | ||
| Modelica.Blocks.Nonlinear.Limiter | imLimited | ||
| NonElectrical.Continuous.SimpleLagLim | imLimitedSimpleLag | ||
| OpenIPSL.Electrical.Banks.PwShunt | shunt | ||
| OpenIPSL.NonElectrical.Logical.Relay3 | imRelay | ||
| Modelica.Blocks.Sources.Constant | Q_capacitors | If Verr>Vov | |
| Modelica.Blocks.Sources.Constant | Q_Reactors | If Verr<-Vov | |
| Modelica.Blocks.Math.Gain | imGain | ||
| Modelica.Blocks.Sources.Constant | imSetPoint2 | ||
| OpenIPSL.Electrical.Sensors.PwVoltage | absoluteVoltage | ||
| Modelica.Blocks.Math.Add | add | ||
| Modelica.Blocks.Math.Add3 | add3_1 |