modelULTC
Discrete tap changer based on Hisken
Information
See PDF documentation by Mohammed Ahsan Adib Murad.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Real | m0 | 1.0375 | Initial tap ratio, from power flow |
| Types.Time | Ttap | 20 | Time delay of tap change |
| Types.PerUnit | vlow | 1.04 | Lower voltage deadband |
| Types.PerUnit | vhigh | 1.06 | Upper voltage deadband |
| Real | m_max | 1.1 | Maximum tap position |
| Real | m_min | 0.9 | Minimum tap position |
| Real | m_step | 0.0125 | Step size |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Interfaces.PwPin | p | ||
| Interfaces.PwPin | n |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Real | m | Tap ratio | |
| Types.PerUnit | vk | Voltage at primary | |
| Types.PerUnit | vm | Voltage at secondary | |
| Types.Angle | anglevk | Angle at primary | |
| Types.Angle | anglevm | Angle at secondary | |
| Types.Time | x1 | Timer | |
| Real | y1 | ||
| Real | y2 | ||
| Real | y3 | ||
| Real | y4 | ||
| Real | y5 | ||
| Real | y7 | ||
| Real | y6 | ||
| Boolean | y2l0 | Loop breaker for when-clauses | |
| Boolean | y3l0 | Loop breaker for when-clauses | |
| Modelica.Blocks.Logical.ZeroCrossing | zeroCrossing |