| Types.ApparentPower | Sn (from baseLoad) | S_b | Power rating |
| Power flow data |
| Types.ApparentPower | S_b (from pfComponent) | SysData.S_b | System base power |
| Types.Voltage | V_b (from pfComponent) | 400e3 | Base voltage of the bus |
| Types.Frequency | fn (from pfComponent) | SysData.fn | System frequency |
| Types.ActivePower | P_0 (from pfComponent) | 1e6 | Initial active power |
| Types.ReactivePower | Q_0 (from pfComponent) | 0 | Initial reactive power |
| Types.PerUnit | v_0 (from pfComponent) | 1 | Initial voltage magnitude |
| Types.Angle | angle_0 (from pfComponent) | 0 | Initial voltage angle |
| Boolean | displayPF (from pfComponent) | false | Display power flow: |
| Parameter mask |
| Boolean | enableS_b (from pfComponent) | false | Enable S_b in parameter list |
| Boolean | enableV_b (from pfComponent) | false | Enable V_b in parameter list |
| Boolean | enablefn (from pfComponent) | false | Enable fn in parameter list |
| Boolean | enableP_0 (from pfComponent) | false | Enable P_0 in parameter list |
| Boolean | enableQ_0 (from pfComponent) | false | Enable Q_0 in parameter list |
| Boolean | enablev_0 (from pfComponent) | false | Enable v_0 in parameter list |
| Boolean | enableangle_0 (from pfComponent) | false | Enable angle_0 in parameter list |
| Boolean | enabledisplayPF (from pfComponent) | false | Enable displayPF in parameter list |
| Variation 1 |
| Types.Time | t_start_1 | 1 | Start time of first load variation |
| Types.Time | t_end_1 | 2 | End time of first load variation |
| Types.ActivePower | dP1 | 0 | First active load variation |
| Types.ReactivePower | dQ1 | 0 | First reactive load variation |
| Variation 2 |
| Types.Time | t_start_2 | 2 | Start time of second Load variation |
| Types.Time | t_end_2 | 3 | End time of second load variation |
| Types.ActivePower | dP2 | 0 | Second active load variation |
| Types.ReactivePower | dQ2 | 0 | Second reactive load variation |
| To Be Implemented |
| Types.PerUnit | Vmax | 1.2 | maximum voltage |
| Types.PerUnit | Vmin | 0.8 | minimum voltage |
| Boolean | forcePQ | true | force 'constant' PQ-load, false may cause simulation problems |
