modelWT3G1
Wind Machine Model with DFIG and Ative Power Control done by a Converter (Type 3)
Extends from OpenIPSL.Electrical.Essentials.pfComponent (Partial model containing all the parameters for entering power flow data).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Types.PerUnit | X_eq | Equivalent reactance for current injection | |
| Types.PerUnit | K_pll | PLL first integrator gain | |
| Types.TimeAging | K_ipll | PLL second integrator gain | |
| Types.PerUnit | P_llmax | PLL maximum limit | |
| Types.Power | P_rated | Turbine rating, not used in the equation | |
| Power flow data | |||
| Types.ApparentPower | S_b (from pfComponent) | SysData.S_b | System base power |
| Types.Voltage | V_b (from pfComponent) | 400e3 | Base voltage of the bus |
| Types.Frequency | fn (from pfComponent) | SysData.fn | System frequency |
| Types.ActivePower | P_0 (from pfComponent) | 1e6 | Initial active power |
| Types.ReactivePower | Q_0 (from pfComponent) | 0 | Initial reactive power |
| Types.PerUnit | v_0 (from pfComponent) | 1 | Initial voltage magnitude |
| Types.Angle | angle_0 (from pfComponent) | 0 | Initial voltage angle |
| Boolean | displayPF (from pfComponent) | false | Display power flow: |
| Complex | Zs | Equivalent impedance (ZSORCE) | |
| Types.ApparentPower | M_b | 100 | Machine base power |
| Parameter mask | |||
| Boolean | enableS_b (from pfComponent) | false | Enable S_b in parameter list |
| Boolean | enableV_b (from pfComponent) | false | Enable V_b in parameter list |
| Boolean | enablefn (from pfComponent) | false | Enable fn in parameter list |
| Boolean | enableP_0 (from pfComponent) | false | Enable P_0 in parameter list |
| Boolean | enableQ_0 (from pfComponent) | false | Enable Q_0 in parameter list |
| Boolean | enablev_0 (from pfComponent) | false | Enable v_0 in parameter list |
| Boolean | enableangle_0 (from pfComponent) | false | Enable angle_0 in parameter list |
| Boolean | enabledisplayPF (from pfComponent) | false | Enable displayPF in parameter list |
Connectors
Components
| Type | Name | Default | Description |
|---|---|---|---|
| OpenIPSL.Electrical.SystemBase | SysData (from pfComponent) | Must add this line in all models | |
| Types.PerUnit | VT | Bus voltage magnitude | |
| Types.Angle | anglev | Bus voltage angle | |
| Types.PerUnit | VY | y-axis terminal voltage | |
| Types.PerUnit | VX | x-axis terminal voltage | |
| Complex | Is | Equivalent internal current source | |
| Modelica.Blocks.Continuous.Integrator | imIntegrator | ||
| Modelica.Blocks.Continuous.LimIntegrator | imIntegrator1 | ||
| OpenIPSL.NonElectrical.Continuous.SimpleLag | imSimpleLag | ||
| OpenIPSL.NonElectrical.Continuous.SimpleLag | imSimpleLag1 | ||
| Modelica.Blocks.Math.Gain | imGain | ||
| Modelica.Blocks.Math.Gain | imGain1 | ||
| Modelica.Blocks.Math.Add | add | ||
| Modelica.Blocks.Nonlinear.Limiter | imLimited |