modelHBridge
Basic ideal H-bridge topology (averaged)
Extends from Interfaces.TwoPort (Common interface for power converters with two ports), PVSystems.Icons.ConverterIcon (Icon for power converter models).
Information
This model further composes IdealAverageCCMSwitch to form a typical H-bridge configuration from which a 1-phase inverter can be constructed. This model is based in averaged switch models.
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Electrical.Analog.Interfaces.PositivePin | p1 (from TwoPort) | Positive pin of the left port (potential p1.v > n1.v for positive voltage drop v1) | |
| Modelica.Electrical.Analog.Interfaces.NegativePin | n1 (from TwoPort) | Negative pin of the left port | |
| Modelica.Electrical.Analog.Interfaces.PositivePin | p2 (from TwoPort) | Positive pin of the right port (potential p2.v > n2.v for positive voltage drop v2) | |
| Modelica.Electrical.Analog.Interfaces.NegativePin | n2 (from TwoPort) | Negative pin of the right port | |
| Modelica.Blocks.Interfaces.RealInput | d |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.SIunits.Voltage | v1 (from TwoPort) | Voltage drop over the left port | |
| Modelica.SIunits.Voltage | v2 (from TwoPort) | Voltage drop over the right port | |
| Modelica.SIunits.Current | i1 (from TwoPort) | Current flowing from pos. to neg. pin of the left port | |
| Modelica.SIunits.Current | i2 (from TwoPort) | Current flowing from pos. to neg. pin of the right port | |
| SwitchModel | s1 | ||
| SwitchModel | s2 |
Contents
| Name | Description |
|---|---|
 SwitchModel |