modelFlecainide_Sllstrm2014_PD_qrs

linear exposure-response sweep — Sällström_2014 :: QRS (QRS interval)

Extends from Pharmacolibrary.Interfaces.PartialExposureResponseSweep (static exposure-response curve in which TIME IS THE SWEEP AXIS, not time).

Information

Flecainide_Sllstrm2014_PD_qrs

The steady-state exposure-response curve of Sällström J et al., Journal of pharmacological and toxicological methods 69(1):24–29 2014 (doi:10.1016/j.vascn.2013.10.001) — QRS interval [ms] against flecainide μM — obtained by sweeping the driver instead of simulating a dose. Model family: linear.

The parameters, in the paper's terms

  E0    =       36.4 ms       drug-free response (baseline) (E 0, Q324)
  slope =        3.3 %/μM     change in response per unit of exposure (pEC100 (total, %/μM), Q335)

The algebra is response = E0 + slope*exposure; this model only supplies the numbers. The x axis is one μM of flecainide per second of simulated time: there is no state, no dose and no kinetics — plot response against exposure (or time).

What it reproduces

  exposure = 0         response 0.0364   (drug-free)

Parameters

TypeNameDefaultDescription
RealE0 (from PartialExposureResponseSweep)0response with no drug
RealEmax (from PartialExposureResponseSweep)1maximal effect term — how it enters the response is set by the extending class
RealEC50 (from PartialExposureResponseSweep)1exposure at half of the maximal EFFECT TERM (D50, for a dose sweep)
Realgamma (from PartialExposureResponseSweep)1Hill coefficient
Realexposure_per_s (from PartialExposureResponseSweep)1.0exposure units per second of simulated time — the sweep rate
Realslope33000[1 / meter; %/μM × 10000]

Components

TypeNameDefaultDescription
Realexposure (from PartialExposureResponseSweep)the driver being swept: a concentration, or a dose
Realfrac (from PartialExposureResponseSweep)Hill fraction, 0..1 — the shared part of every exposure-response shape
Realresponse (from PartialExposureResponseSweep)modelled response at that exposure

Revisions

  • 11/2026 generated by pharmacolibrary-dev export.pharmacolibrary_models from Sällström_2014: parameters extracted from the paper by the pharmacolibrary-dev pipeline, model built by its engineer, reviewed: curated candidate