modelConcEffect
Extends from Pharmacolibrary.Interfaces.PartialConcEffect (empirical concentration-response; no fitted PK model).
Information
ConcEffect
The concrete, instantiable form of
PartialConcEffect — the
same relation effect = E0 + Emax*conc^gamma/(EC50^gamma + conc^gamma), usable as a
COMPONENT. EmaxEffect is its counterpart for a concentration arriving on a
ConcentrationPort from a fitted PK model; this one takes the concentration as a
plain input, for a paper that fitted effect directly against a reported concentration with no PK
model anywhere.
Drive it from the enclosing model
The input must be bound where the component is used:
model MyCurve
Pharmacolibrary.Pharmacodynamic.ConcEffect pd(E0 = …, Emax = …, EC50 = …, gamma = …);
equation
pd.conc = 1.0*time; // sweep, so the plot is effect against concentration
end MyCurve;
A sub-component's input is a free variable of the enclosing model and can be bound by an
equation. A TOP-LEVEL input cannot: extending the partial directly in a simulated model leaves
conc unbound, it defaults to zero, and the model returns E0 at every
point while still checking and simulating without complaint. That is the reason this concrete
class exists.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Real | E0 (from PartialConcEffect) | 0 | baseline effect (no drug) |
| Real | Emax (from PartialConcEffect) | maximal effect | |
| Real | EC50 (from PartialConcEffect) | concentration at half-maximal effect | |
| Real | gamma (from PartialConcEffect) | 1 | Hill/sigmoidicity |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Real | conc (from PartialConcEffect) | plasma/measured concentration (reported/observed by the paper, not derived from a fitted PK compartment) | |
| Real | effect (from PartialConcEffect) |