modelSigmoidEmaxSweep

direct sigmoid Emax exposure-response curve, swept

Extends from Pharmacolibrary.Interfaces.PartialExposureResponseSweep (static exposure-response curve in which TIME IS THE SWEEP AXIS, not time).

Information

SigmoidEmaxSweep

The curve response = E0 + Emax*C^gamma/(EC50^gamma + C^gamma), swept over exposure. gamma = 1 (the default) gives the plain Emax curve, so this one class covers both the emax and sigmoid_emax families.

Here — unlike the indirect-response case — EC50 really is the exposure at half the maximal response, because the effect term is ADDED to the baseline.

effect is reported as an absolute change rather than a percentage: a direct Emax model is routinely fitted with E0 = 0, and a percentage of zero is not a number.

Parameters

TypeNameDefaultDescription
RealE0 (from PartialExposureResponseSweep)0response with no drug
RealEmax (from PartialExposureResponseSweep)1maximal effect term — how it enters the response is set by the extending class
RealEC50 (from PartialExposureResponseSweep)1exposure at half of the maximal EFFECT TERM (D50, for a dose sweep)
Realgamma (from PartialExposureResponseSweep)1Hill coefficient
Realexposure_per_s (from PartialExposureResponseSweep)1.0exposure units per second of simulated time — the sweep rate

Components

TypeNameDefaultDescription
Realexposure (from PartialExposureResponseSweep)the driver being swept: a concentration, or a dose
Realfrac (from PartialExposureResponseSweep)Hill fraction, 0..1 — the shared part of every exposure-response shape
Realresponse (from PartialExposureResponseSweep)modelled response at that exposure
Realeffectchange from the drug-free baseline at that exposure