modelmyTapChanger
Academic tap changer regulation
Extends from Icons.myRegulation (Icon for tape changer).
Information
This regulation is an academic example of voltage regulation. Next figure roughly illustrates it:
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Types.myVoltage | setPointU | 20400 | Setting value for U, usually between 20.4 and 20.8 kV |
| Types.myPerUnit | VoltRange | 0.14 | Range of possible voltage variation (0.12, 0.14, 0.15, 0.16, or 0.17) |
| Types.myPerUnit | rangeU | 1.25 | Acceptable range of values for U around setting point |
| Integer | Ntap | 17 | Number of tap positions (17, 21, or 23) |
| Types.myVoltage | deltaTapU | VoltRange*20000/((Ntap - 1)/2) | Voltage variation between two consecutive taps: +-VoltRange*20000/((Ntap-1)/2) |
| Integer | startTap | integer((Ntap + 1)/2) | Starting tap position |
| Types.myTime | firstTapChangeTimeout | 60 | Time lag before changing the first tap |
| Types.myTime | nextTapChangeTimeout | 10 | Time lag before changing the following taps |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Interfaces.RealInput | U | ||
| Modelica.Blocks.Interfaces.RealOutput | varRatio | Variable transformer ratio |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Integer | tap | Current tap position |