| Assumptions |
| Boolean | allowFlowReversal (from CombustorBase00) | false | = true to allow flow reversal, false restricts to design direction (port_a -> port_b) |
| Initialization › fluid_1 |
| Modelica.SIunits.MassFlowRate | m_flow1_init (from CombustorBase00) | 1.0 | |
| Modelica.SIunits.Pressure | p1_init (from CombustorBase00) | 20*101.3*1000 | |
| Modelica.SIunits.Temperature | T1_init (from CombustorBase00) | 800 | |
| Modelica.SIunits.SpecificEnthalpy | h1_init (from CombustorBase00) | T1_init*1.004*1000 | |
| Initialization › fluid_2 |
| Modelica.SIunits.MassFlowRate | m_flow2_init (from CombustorBase00) | -1.0*m_flow1_init | |
| Modelica.SIunits.Pressure | p2_init (from CombustorBase00) | p1_init | |
| Modelica.SIunits.Temperature | T2_init (from CombustorBase00) | 1600.0 | |
| Modelica.SIunits.SpecificEnthalpy | h2_init (from CombustorBase00) | T2_init*1.004*1000 | |
| Initialization › others |
| Real | effComb_init (from CombustorBase00) | 0.999 | |
| switch |
| Boolean | use_u_m_flow_fuel | true | get m_flow_fuel from the real input connector |
| Boolean | use_u_LHV_fuel | false | get LHV_fuel from the real input connector |
| Boolean | use_u_effComb | false | get effComb from the real input connector |
| Component characteristics |
| Modelica.SIunits.MassFlowRate | m_flow_fuel_paramInput | 1.0 | mass flow rate of fuel, valid only when use_u_mflow_fuel==false |
| Modelica.SIunits.SpecificEnthalpy | LHV_fuel_paramInput | 42.8*10.0^6.0 | lower heatting value of fuel, valid only when use_u_LHV_fuel==false |
| Real | effComb_paramInput | 0.99 | combustion efficiency, valid only when use_u_effComb==false |
