modelDuctDpqpWcSecOrder00
Extends from PropulsionSystem.BaseClasses.BasicElements.DuctBase00.
Parameters
| Type | Name | Default | Description |
|---|
| Assumptions |
| Boolean | allowFlowReversal (from DuctBase00) | false | = true to allow flow reversal, false restricts to design direction (port_a -> port_b) |
| Initialization › fluid_1 |
| Modelica.SIunits.MassFlowRate | m_flow1_init (from DuctBase00) | 1.0 | |
| Modelica.SIunits.Pressure | p1_init (from DuctBase00) | 101.3*1000 | |
| Modelica.SIunits.Temperature | T1_init (from DuctBase00) | 288.15 | |
| Modelica.SIunits.SpecificEnthalpy | h1_init (from DuctBase00) | 1.004*1000*288.15 | |
| Initialization › fluid_2 |
| Modelica.SIunits.MassFlowRate | m_flow2_init (from DuctBase00) | -1.0*m_flow1_init | |
| Modelica.SIunits.Pressure | p2_init (from DuctBase00) | 101.3*1000 | |
| Modelica.SIunits.Temperature | T2_init (from DuctBase00) | 288.15 | |
| Modelica.SIunits.SpecificEnthalpy | h2_init (from DuctBase00) | 1.004*1000*288.15 | |
| switch |
| Boolean | use_u_dPqPdes | false | get dPqP from the real input connector |
| Characteristics |
| Real | dPqPdes_paramInput | 0.05 | total pressure loss factor, valid only when use_u_dPqPdes==false, value fixed through simulation |
