| Assumptions |
| Boolean | allowFlowReversal (from ElementFrame_2FluidPorts) | true | = true to allow flow reversal, false restricts to design direction (port_a -> port_b) |
| Initialization › Fluid states |
| Modelica.SIunits.MassFlowRate | m_flow1_init (from ElementFrame_2FluidPorts) | 1.0 | |
| Modelica.SIunits.Pressure | p1_init (from ElementFrame_2FluidPorts) | 101.3*1000 | |
| Modelica.SIunits.Temperature | T1_init (from ElementFrame_2FluidPorts) | 288.15 | |
| Modelica.SIunits.SpecificEnthalpy | h1_init (from ElementFrame_2FluidPorts) | 1.004*1000*288.15 | |
| Modelica.SIunits.MassFlowRate | m_flow2_init (from ElementFrame_2FluidPorts) | -1.0*m_flow1_init | |
| Modelica.SIunits.Pressure | p2_init (from ElementFrame_2FluidPorts) | 101.3*1000 | |
| Modelica.SIunits.Temperature | T2_init (from ElementFrame_2FluidPorts) | 288.15 | |
| Modelica.SIunits.SpecificEnthalpy | h2_init (from ElementFrame_2FluidPorts) | 1.004*1000*288.15 | |
| switch |
| switch_calculate_Fram | switchCalcFram (from Inlet_Base) | switch_calculate_Fram.calculate | |
| PropulsionSystem.Types.switches.switch_parameter_input | switchInput_effRam | PropulsionSystem.Types.switches.switch_parameter_input.use_desValue | |
| switch_Inlet_Subelement | switchSubelement_effRam | switch_Inlet_Subelement.NoSubelement | |
| Characteristics |
| Real | effRamDes | 0.95 | ram pressure recovery factor |
