modelMassFlowAtDesignPoint01

Diagram of MassFlowAtDesignPoint01Open the diagram
▶ Check in your browser

Parameters

TypeNameDefaultDescription
switch
Booleanuse_u_m_flow_desfalseget m_flow_des from the real input connector
Assumptions
BooleanallowFlowReversalfalse= true to allow flow reversal, false restricts to design direction (port_a -> port_b)
Component characteristics
Modelica.SIunits.MassFlowRatem_flow_des_paramInput10.0
Initialization › fluid_1
Modelica.SIunits.MassFlowRatem_flow1_initm_flow_des_paramInput
Modelica.SIunits.Pressurep1_init101.3*1000
Modelica.SIunits.TemperatureT1_init288.15
Modelica.SIunits.SpecificEnthalpyh1_init1.004*1000*288.15
Initialization › fluid_2
Modelica.SIunits.MassFlowRatem_flow2_init-1.0*m_flow1_init
Modelica.SIunits.Pressurep2_init101.3*1000
Modelica.SIunits.TemperatureT2_init288.15
Modelica.SIunits.SpecificEnthalpyh2_init1.004*1000*288.15

Connectors

TypeNameDefaultDescription
Modelica.Fluid.Interfaces.FluidPort_aport_1
Modelica.Fluid.Interfaces.FluidPort_bport_2
Modelica.Blocks.Interfaces.RealInputu_m_flow_des

Components

TypeNameDefaultDescription
Modelica.SIunits.MassFlowRatem_flow
Real[2]auxVar
PropulsionSystem.EngineSimEnvironmentenvironmentSystem wide properties
Medium.BasePropertiesfluid_1flow station of inlet
Medium.BasePropertiesfluid_2flow station of outlet

Contents

NameDescription
Medium