modelISmpsDport
An extension of SMPS.BasicConverter.ISmps with an aditional input
port that allows direct setting of the duty cycle ratio (D).
Extends from ISmps ( An interface that defines four pins of typical power converters. The models, derived from this interface, do not include a voltage source (should be connected to inP and inN) and a load (should be connected to outP and outN). ).
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| EL.Interfaces.PositivePin | inP (from ISmps) | Positive input pin | |
| EL.Interfaces.NegativePin | inN (from ISmps) | Negative input pin | |
| EL.Interfaces.PositivePin | outP (from ISmps) | Positive output pin | |
| EL.Interfaces.NegativePin | outN (from ISmps) | Negative output pin | |
| Modelica.Blocks.Interfaces.RealInput | d | Duty cycle as a dimensionless real number between 0 and 1 |