.SMPS.Switch.GateDriver

Information

  A gate driver ensures that a high switching signal is converted into
  the proper gate to source voltage, ensuring that the signal will
  actually switch the MOSFET transistor to ON or OFF state.
  
  The gate driver should be connected as follows:
    dp - PWM modulator's positive pin
    dn - PWM modualtor's negative pin
    gp - MOSFET's gate pin
    tn - MOSFET's source pin
  

Generated at 2024-03-28T19:15:55Z by OpenModelicaOpenModelica 1.22.3 using GenerateDoc.mos