.ScalableTestSuite.Thermal.HeatConduction.Models.OneDHeatTransferTT_FD

Information

A uniform rod has the length L, density ρ, specific heat capacity cp and thermal conductivity λ which are all assumed to be constant. Moreover, the sides of the rod are assumed to be insulated. In HeatConductionTT, both ends are exposed to a fixed temperature. We considered a small portion of the rod which has a width of dx from a distance x, and by considering the conservation of energy the equations are defined. According to the conservation of energy, difference between the heat in from left boundary and heat out from the right boundary has to be equal to the heat change at the portion at Δx in time Δt.

The discretized equations are described in the following form:

where i = 2,..,N−1 and they correspond to the temperature nodes along the rod excluding the temperature variables at the ends. In HeatConductionTT, T1 and TN have constant temperature values.

The parameters for HeatConductionTT_FD are:

Parameters	Comment
L	Length of the rod
N	number of nodes
T0	Initial temperature
T1	temperature at the first node
TN	temperature at the last node
cp	material specific heat capacity
lambda	material thermal conductivity
rho	material density
dx	element length

Generated at 2024-11-21T19:25:40Z by OpenModelicaOpenModelica 1.24.2 using GenerateDoc.mos