modelPrescribedHeatFlow

Prescribed heat flow boundary condition for discretized aggregate

Information

This model allows a specified amount of heat flow rate to be "injected" into a thermal system.
The amount of heat at each cell is given by Q_flow/N.
The heat flows into the component to which the component PrescribedHeatFlow is connected, if the input signal is positive.

Author:	Haiko Steuer	SCD
Checked by:
Protection class:	public

License, Copyright and Disclaimer

Licensed by Siemens AG under the Siemens Modelica License 2

Copyright 2007-2012 Siemens AG. All rights reserved.

This Modelica package is free software and the use is completely at your own risk; it can be redistributed and/or modified under the terms of the Siemens Modelica License 2. For license conditions (including the disclaimer of warranty) see Siemens Modelica License 2 .

Parameters

Type	Name	Default	Description
Integer	numberOfCells	2	Number of cells

Connectors

Type	Name	Default	Description
Modelica.Blocks.Interfaces.RealInput	Q_flow		Overall heat input
Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_b	portsOut		Heat output distribution

Revisions

December 2006, added by Haiko Steuer