modelWaterSink

Pressure-enthalpy sink for simple water flows
Diagram of WaterSinkOpen the diagram
▶ Check in your browser

Information

This is a model for a fluid boundary condition with fixed

  • pressure
  • specific enthalpy

Note that the specific enthalpy value takes only effect in case of reverse flow.

Author: Kilian Link SCD
Checked by:
Protection class: public

License, Copyright and Disclaimer


Licensed by Siemens AG under the Siemens Modelica License 2

Copyright 2007-2012 Siemens AG. All rights reserved.

This Modelica package is free software and the use is completely at your own risk; it can be redistributed and/or modified under the terms of the Siemens Modelica License 2. For license conditions (including the disclaimer of warranty) see Siemens Modelica License 2 .

Parameters

TypeNameDefaultDescription
Medium.AbsolutePressurep_start1.01325e5Pressure
Medium.SpecificEnthalpyh_start1e5Specific enthalpy for reverse flow

Connectors

TypeNameDefaultDescription
Modelica.Fluid.Interfaces.FluidPort_aport
Modelica.Blocks.Interfaces.RealInputp_set
Modelica.Blocks.Interfaces.RealInputh_set

Components

TypeNameDefaultDescription
Medium.SpecificEnthalpyhPortActualSpecific enthalpy
Medium.BasePropertieswaterfluid state

Contents

NameDescription
Medium

Revisions

  • Feb 2009, modified for stream connectors by Haiko Steuer
  • December 2006 by Haiko Steuer