modelTest_htFDBR82

Comparison of FlueGas and FlueGasSingleComponent as well as cp functions
▶ Simulate in your browser

Extends from Modelica.Icons.Example (Icon for runnable examples).

Information

This test compares some results of FlueGas functions with the FlueGasSingleComponent results
In addition, the specific heat capacities according to

  • FDBR82 (Krawal modular, Dynaplant II)
  • NASA (Modelica's IdealGasMixtures, e.g. FlueGas)
  • FDBRold (DynaplantOld, SIMIT routine)
are compared.

Note that the enthalpy offset in FlueGasSingleComponent is such that T=0 degC at h=0.
The specific heat capacities from NASA and FDBR82 differs less then 0.1 per cent for typical flue gases.

Author: Haiko Steuer SCD
Checked by:
Protection class:
Copyright © 2007 Siemens AG, PG EIP12. All rights reserved.

This model is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY. For details see disclaimer

Parameters

TypeNameDefaultDescription
Gas.AbsolutePressurep1e5Gas pressure
SI.Timeperiod100time for t-range
Gas.TemperatureTInitial273.15Begin of t range
Gas.TemperatureTFinal1773.15End of t range

Components

TypeNameDefaultDescription
SiemensPower.Units.SpecificEnthalpyhT_FDBR82
SiemensPower.Units.TemperatureT
SiemensPower.Units.SpecificEnthalpyhMedia
Realcp_FDBR82
SiemensPower.Units.SpecificEnthalpyh_cp

Contents

NameDescription
GasFlue gas with 6 components

Revisions

  • May 2011, FDBR acc. Defos added to test
  • December 2006 by Haiko Steuer