modelPartialHeatTransfer

Base class for friction pressure loss correlations

Information

Any derived inner heat transfer correlation must define the relations for the following two quantities:

Heat transfer coefficient alpha
location of boiling crisis (dry-out) xdo (for single phase flow, this will bot be used, so just give a dummy value)

Author:	Haiko Steuer	SCD
Checked by:
Protection class:	public

License, Copyright and Disclaimer

Licensed by Siemens AG under the Siemens Modelica License 2

Copyright 2007-2012 Siemens AG. All rights reserved.

This Modelica package is free software and the use is completely at your own risk; it can be redistributed and/or modified under the terms of the Siemens Modelica License 2. For license conditions (including the disclaimer of warranty) see Siemens Modelica License 2 .

Parameters

Type	Name	Default
Modelica.SIunits.Length	diameterInner	geoPipe.d_out - 2*geoPipe.s
Advanced
SiemensPower.Utilities.Structures.PipeGeo	geoPipe

Components

Type	Name	Default	Description
Modelica.SIunits.Pressure	p
Modelica.SIunits.SpecificEnthalpy	h
Modelica.SIunits.Density	rho
Modelica.SIunits.DynamicViscosity	eta
Modelica.SIunits.SpecificHeatCapacity	cp
Modelica.SIunits.ThermalConductivity	lambda
Real	steamQuality
Modelica.SIunits.MassFlowRate	m_flow
Modelica.SIunits.TemperatureDifference	dT
Modelica.SIunits.CoefficientOfHeatTransfer	alpha