modelExtractor
Ideal heat extractor
Extends from Modelica.Fluid.Interfaces.PartialTwoPort (Partial component with two ports).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| SI.Efficiency | eff | 1.0 | Efficiency of conversion |
| Boolean | use_input | true | Use input else parameter |
| Medium.Temperature | T_fixed | system.T_start | Fixed T when no input |
| Assumptions | |||
| Boolean | allowFlowReversal (from PartialTwoPort) | system.allowFlowReversal | = true to allow flow reversal, false restricts to design direction (port_a -> port_b) |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Fluid.Interfaces.FluidPort_a | port_a (from PartialTwoPort) | Fluid connector a (positive design flow direction is from port_a to port_b) | |
| Modelica.Fluid.Interfaces.FluidPort_b | port_b (from PartialTwoPort) | Fluid connector b (positive design flow direction is from port_a to port_b) |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Fluid.System | system (from PartialTwoPort) | System wide properties | |
| FlowModel | flowmod | ||
| Medium.Temperature | T_set | Set T from input | |
| SI.HeatFlowRate | Q_flow | Heat from extractor | |
| Medium.Temperature | T | Delivered temperature |
Contents
| Name | Description |
|---|---|
| FlowModel |