modelIdealPump

Solar receiver with fluid interface
Diagram of IdealPumpOpen the diagram
▶ Check in your browser

Extends from Modelica.Fluid.Interfaces.PartialTwoPort (Partial component with two ports).

Parameters

TypeNameDefaultDescription
Booleancont_m_flowtrueControl m_flow else control dp
Booleanuse_inputtrueUse input else parameter
SI.MassFlowRatem_flow_fixed0Fixed m_flow when no input
SI.Pressuredp_fixed0Fixed dp when no input
Assumptions
BooleanallowFlowReversal (from PartialTwoPort)system.allowFlowReversal= true to allow flow reversal, false restricts to design direction (port_a -> port_b)

Connectors

TypeNameDefaultDescription
Modelica.Fluid.Interfaces.FluidPort_aport_a (from PartialTwoPort)Fluid connector a (positive design flow direction is from port_a to port_b)
Modelica.Fluid.Interfaces.FluidPort_bport_b (from PartialTwoPort)Fluid connector b (positive design flow direction is from port_a to port_b)

Components

TypeNameDefaultDescription
Modelica.Fluid.Systemsystem (from PartialTwoPort)System wide properties
SI.MassFlowRatem_flow_set
SI.Pressuredp_set