modelFixedOutletPB
Basic power block model
Extends from SolarTherm.Models.PowerBlocks.FluidPB (Power block partial model).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| SI.Pressure | p_set_outlet | 100000 | Set point p of outlet |
| SI.Temperature | T_set_outlet | 300 | Set point T of outlet |
| Assumptions | |||
| Boolean | allowFlowReversal (from PartialTwoPort) | system.allowFlowReversal | = true to allow flow reversal, false restricts to design direction (port_a -> port_b) |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Fluid.Interfaces.FluidPort_a | port_a (from PartialTwoPort) | Fluid connector a (positive design flow direction is from port_a to port_b) | |
| Modelica.Fluid.Interfaces.FluidPort_b | port_b (from PartialTwoPort) | Fluid connector b (positive design flow direction is from port_a to port_b) |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Fluid.System | system (from PartialTwoPort) | System wide properties | |
| SI.Power | P (from PowerBlock) | Electrical output power | |
| Medium.BaseProperties | mprop_b |