modelCompressorToDiscuss
Extends from SolarTherm.Media.CO2.PropCO2.
Parameters
| Type | Name | Default | Description |
|---|
| Real | eta_design | 0.87 | Maximal isentropic efficiency of the compressor |
| Real | PR | 2.313 | Pressure ratio |
| Modelica.SIunits.AbsolutePressure | p_out | 250*10^5 | outlet pressure |
| Modelica.SIunits.ThermodynamicTemperature | T_amb | 273.15 + 40 | Outlet temperature in Kelvin |
| Real | flowGuess | 1000 | |
| Real | diam_rotor | 0.18 | |
| Real | N_design | 3358 | |
Components
| Type | Name | Default | Description |
|---|
| Modelica.Fluid.Interfaces.FluidPort_a | port_a | | |
| Modelica.Fluid.Interfaces.FluidPort_b | port_b | | |
| MedPB.ThermodynamicState | state_a | | thermodynamic state at the entrance |
| MedPB.ThermodynamicState | state_isen | | thermodynamic state at the end of the isentropic compression |
| MedPB.ThermodynamicState | state_b | | thermodynamic state at the end of the real compresssion |
| Modelica.SIunits.Power | W_comp | | power used for compression |
| Modelica.SIunits.SpecificEntropy | s_entrance | | exergy at the entrance of the compressor |
| Real | eta_comp | | |
Contents
| Name | Description |
|---|
 MedPB | |
